Experiments on water-wave interactions with a horizontal submerged elastic plate
Experiments on water-wave interactions with a horizontal submerged elastic plate
Received 18 November 2024; revised 16 January 2025; accepted 16 January 2025
This article explores how a submerged elastic plate, clamped at one edge, interacts with water waves. Submerged elastic plates have been considered as potentially effective design elements in the development of wave energy harvesters but their behaviour in a wave field remains largely unexplored, especially experimentally. Positioned at a fixed depth in a wave tank, the flexible plate demonstrates significant wave reflection capabilities, a characteristic absent in rigid plates of identical dimensions. The experiments thus reveal that plate motion is crucial for wave reflection. Sufficiently steep waves are shown to induce a change in the mean position of the plate, with the trailing edge reaching the free surface in some cases. This configuration change is found to be particularly efficient to break water waves. These findings contribute to understanding the potential of elastic plates for wave energy harvesting and wave attenuation scenarios.
1. Introduction
1. Introduction
The potential of wave energy as a renewable electricity source has been assessed to exceed the global demand for electricity ; . However, efficient designs still remain to be developed at an industrial level. Horizontally submerged flexible plates could be part of those designs due to their improved survivability . Until now, flexible submerged elastic plates have mostly been studied numerically and theoretically in a configuration where both edges are clamped, with the objective of harnessing wave energy or protecting the coastline. Cho & Kim and Cho & Kim considered the plate as a potential wave barrier. From the on-site observations that a muddy seafloor can effectively dampen water waves, Alam proposed a design to harvest wave energy by mimicking this phenomenon. To that aim, a flexible plate is used as a wave energy harvester. The flexible plate is hinged at the seafloor and oscillates due to the wave forcing, similarly to the mud in the ocean floor. Those oscillations are used to produce electricity by means of a power take-off, P T O, system. The Wave-Carpet design has been investigated numerically and experimentally by Desmars et al. ( ), and . Renzi ( ) studied numerically a variation of the Wave-Carpet considering the use of a piezoelectric material to produce electricity, while Achour et al. ( ) added the effect of a current in addition to the waves. investigated the case of a flexible thin submerged plate resting on an elastic foundation modelled using the Winkler approach. Finally, submerged flexible plates clamped at both edges have been studied in more complex configurations, such as close to a wall as potential wave barriers ( ; ), superimposed with other plates ( ; ) or in series ( ).
Contrary to the two-edge clamping, clamping the plate at only one edge has barely been studied. Shoele investigated numerically the case of a submerged elastic plate as a hybrid current/wave energy converter, but the impact of waves alone was not examined. Michele et al. investigated the behaviour of a floating elastic plate moored onto a set of P T O systems. Their theoretical model shows that plate elasticity introduces additional resonant frequencies compared with rigid plates, enhancing both wave energy extraction and the capture factor bandwidth. While their preliminary experimental estimations of power extraction with a flexible floater demonstrator compared favourably with their model, the wave–structure interaction mechanisms remain largely unexplored.
The aim of this paper is to characterize experimentally the interaction of a flexible submerged elastic plate, clamped at only one edge, with water waves. A table-top experiment has been developed to study the wave–plate interaction, which allows the use of vision-based data extraction techniques. Schlieren imaging is utilized to measure the free surface height and a side view of the tank to track the plate deformation. The ability of the plate to reflect, transmit or dissipate water waves is computed by measuring the reflection and transmission coefficients. It is observed that the flexible plate can reflect water waves over a certain range of wave frequencies. It exposes potential applications of such a system for coastal protection and, more generally, offers a deeper fundamental understanding of the role played by flexibility in the wave–structure interaction applications. The comparison of wave reflection and transmission by a submerged flexible plate and a submerged rigid plate of the same dimensions shows that the plate motion is responsible for wave reflection. Finally, when increasing the wave amplitude, the flexible plate can act like a perfect wave absorber by changing its mean position. The flexible plate acts as a reconfigurable water-wave absorber which could be able to totally dampen the waves in high sea conditions.

